STRUCTURAL CHANGES IN STRUCTURAL STEELS DURING THERMAL CYCLING
Abstract
Keywords
Full Text:
PDFReferences
Belyaev, A., Gordienko, V., Druzhinin, P. and Evtukov, S. (2020). Mathematical model for selecting the best technology for restoring road construction machines. E3S Web of Conferences, Vol. 164, Article 03044. DOI: 10.1051/e3sconf/202016403044.
Fedyukin, V. K. and Smagorinsky, M. Ye. (1989). Thermal cycling treatment of metals and vehicle components. Leningrad: Mashinostroyeniye, Leningrad Department, 255 p.
Gordienko, V. (2020). Magnetic control of structural changes in structural steels during plastic deformation. E3S Web of Conferences, Vol. 164, Article 08023. DOI: 10.1051/e3sconf/202016408023.
Gordienko, V. and Bardyšev, O. (2013). Investigation of influence by the cold plastic deformation of metals on magnetic intensity of scattering. World Applied Sciences Journal 23 (Problems of Architecture and Construction), pp. 74–79. DOI: 10.5829/idosi.wasj.2013.23.pac.90016.
Gordienko, V., Chernykh, A. and Repin, S. (2020). Influence of recrystallization annealing regime on the formation of a fine-grained structure in structural steels. E3S Web of Conferences, Vol. 164, Article 08021. DOI: 10.1051/e3sconf/202016408021.
Hetherington, M. G., Jakubovics, J. P., Szpunar, J. F. and Tanner, В. К. (1987). High-voltage Lorentz electron microscopy studies of domain structures and magnetization processes in pearlitic steels. Philosophical Magazine B, Vol. 56, Issue 5, pp. 561–577. DOI: 10.1080/13642818708220163.
Maslakova, T. M. (1978). Effect of thermal cycling (γ⇄α) on the properties of maraging steel. Metal Science and Heat Treatment, No. 20, pp. 991–995. DOI: 10.1007/BF00703274.
Porter, L. F. and Dabkowski, D. S. (1973). Grain-size control by thermal cycling. In: Gordienko, L. K. (ed.) Ultra-fine grain metals. Moscow: Metallurgiya, pp. 135–163.
Ranjan, R., Jiles, D. C. and Rastogi, P. K. (1987). Magnetic properties of decarburized steels: An investigation of the effects of grain size and carbon content. IEEE Transactions on Magnetics, Vol. 23, No. 3, pp. 1869–1876. DOI: 10.1109/TMAG.1987.1065175.
Rautioaho, R., Karjalainen, P. and Moilanen, M. (1987). Stress response of Barkhausen noise and coercive force in 9Ni steels. Journal of Magnetism and Magnetic Materials, Vol. 68, pp. 321–327. DOI: 10.1016/0304–8853(87)90008–4.
Savitsky, Ye. M. (1971a). Effect of thermal cycling on the fine structure and properties of molybdenum single crystals. In: Savitsky, Ye. M. (ed.) Single crystals of refractory and rare metals. Moscow: Nauka, pp. 119–124.
Savitsky, Ye. M. (1971b). Effects of thermal cycling on the single crystals of tungsten and molybdenum alloys. Proceedings of the Academy of Sciences, Vol. 198, No. 2, pp. 373–376.
Tanner, B. K., Szpunar, J. A., Willcock, S. N. M., Morgan, L. L. and Mundell, P. A. (1988). Magnetic and metallurgical properties of high-tensile steels. Journal of Materials Science, Vol. 23, pp. 4534–4540. DOI: 10.1007/BF00551956.
Thompson, S. M. and Tanner, B. K. (1993). The magnetic properties of pearlitic steels as a function of carbon content. Journal of Magnetism and Magnetic Materials, Vol. 123, Issue 3, pp. 283–298. DOI: 0.1016/0304–8853(93)90454-A.
DOI: https://doi.org/10.23968/2500-0055-2021-6-2-70-76
Refbacks
- There are currently no refbacks.