GRAVITY MIXERS WITH VIBRATION ACTIVATOR IN CONSTRUCTION ENGINEERING

Victor Kuzmichev, Vladimir Verstov

Abstract


Vibration processes and corresponding machinery and equipment are widely used in construction, production of construction materials and other industries. Compaction, crushing, separation, piling, dosing and transportation of bulk materials are just several processes where it is expedient to use vibration.
The article presents original designs of gravity (drum) mixers with vibration activators placed inside the mixing chamber. A vibration activator is installed in "dead" zones located along the geometrical axis of the mixing chamber where intensity of convective mixing is low.
Methods of design of balanced eccentric vibration activators of precessing type are considered. Results of production tests with regard to the industrial design of the gravity vibration mixer are presented. Considerable attention is paid to measurement of the vibration level reflecting the quality of dynamic balancing of the vibration activator. Vibrational impact on the environment and maintenance personnel amounts to ~ 5 m/s2, corresponding to standard values for processing equipment as per GOST 22061-76.

Keywords


Gravity mixer, vibration activator, design methods, dynamic balancing

Full Text:

PDF

References


Bauman, V.A., Bykhovsky, I.I. (1977). Vibratcionnye mashiny i protcessy v stroitelstve [Vibration machines and processes in construction]. Moscow: Vysshaya Shkola, p.256. (in Russian)

Blekhman, I.I. (1994). Vibratcionnaia mekhanika [Vibration mechanics]. Moscow: Fizmatlit, p.400. (in Russian)

Chelomey, V.N. (1981). Vibratsiya v tekhnike. Spravochnik v 6 tomakh [Machinery vibrations. Reference book in 6 volumes]. Moscow: Mashinostroenie Publishing House, vol.6, p.509. (in Russian)

Efremov, I.M., Lobanov, D.V. (2008). Novye rotornye smesiteli s razlichnymi sistemami vibrovozbuzhdeniya [New rotary mixing devices with various systems of vibration activation]. Stroitel'nye i dorozhnye mashiny [Construction and road machinery], 9, pp. 7–9. (in Russian)

Efremov, I.M., Lobanov, D.V. (2009). Vibrobetonosmesiteli: put' dlinoy v 70 let [Vibration concrete finishers: 70 years old experience]. Stroitel'nye i dorozhnye mashiny [Construction and road machinery], 10, pp. 15–19. (in Russian)

Kuzmichev, V.A. (2013). Osnovy proektirovaniya vibromikserov [Basics of designing of vibration mixers]. LAP LAMBERT AcademicPublishing, p.136. (in Russian)

Kuzmichev, V. A. (2014). Osnovy proektirovaniia vibratcionnogo oborudovaniia [Fundamentals of vibration equipment design]. Saint Petersburg: Lan, p.208. (in Russian)

Kuzmichev, V., Verstov, V. (2017a). Vibration activators in the construction production technology. Architecture and Engineering, 2 (1), pp. 24–32. DOI: 10.23968/2500-0055-2017-2-1-41-50

Kuzmichev, V., Verstov, V. (2017b). Vessel mixers with vibration activator in construction engineering. Architecture and Engineering, 2 (2). pp.20–26. DOI: 10.23968/2500-0055-2017-2-2-20-26

Verstov, V.V., Tishkin, D.D., Romanovsky, V.N. (2013). Sovershenstvovanie tekhnologii bespodkladochnogo montazha promyshlennogo oborudovaniia [Improvement of the technology of installation of industrial equipment without backing plates]. Installation and special works in construction, 7, pp. 27–31. (in Russian)




DOI: https://doi.org/10.23968/2500-0055-2017-2-4-26-33

Refbacks

  • There are currently no refbacks.




     

ISSN: 2500-0055