Dmitrii Nikitin, Liudmila Nikitina, Arthur Asoyan, Alexey Marusin


The article describes operating conditions of the railroad dowel used in ZhBR 65 resilient rail fasteners. Requirements for railroad dowel tests in terms of their expediency, possibility to perform such tests and conformity with the actual operating conditions are analyzed. The initiative of the authors, arisen during an analysis of regulatory documents, served as a basis for the studies. Stresses in a dowel and its safety factor in operation and tests were determined analytically by the finite element method, using the APM FEM library, the system of strength analysis for KOMPAS-3D, certified within the GOST-R system.
Railroad dowels manufactured by OOO NTT, ZAO Polimer ZAO and Vossloh Fastening Systems GmbH were used as study objects. For the purposes of simulation, 3D models of the corresponding dowels and their mating parts (sleeper, railroad screw, tension clamp, etc.) were built. According to the studies, in tensile tests of dowels, conducted according to Clause 4.6 of Specifications TsP 369 ТU-7, stresses of 85...100 MPa occur in the bodies of all dowels under consideration, which considerably exceed stresses appearing in dowels during operation, and the nature and distribution of such stresses do not correspond to those of operating stresses, the maximum value of which does not exceed 10 MPa.
The analysis of stresses arising in sleepers with dowels by the manufacturers under consideration has shown that their limit value is 75 MPa. Besides, in sleepers with dowels by OOO NTT and Vossloh Fastening Systems GmbH, the maximum stresses are in the sleeper body, which allows for their redistribution and prevents dowel pulling-out from a sleeper. Sleepers with dowels made by ZAO Polimer have maximum stresses in the upper face of a sleeper coaxially with the dowel axis, which significantly increases the probability of dowel pulling-out in case of extreme loads.


Railroad dowel, rail fastener, track structure, internal stresses, yield strength, ultimate strength, safety factor

Full Text:



Akimov, V.P. (2006). Dowel fixing rail fastening. Patent RU56899U1.

Akimov, V.P. (2009a). Dowel fastening rail fastening assembly. Patent RU89532U1.

Akimov, V.P. (2009b). Dowel fastening rail fastening assembly. Patent RU89533U1.

Akimov, V.P. (2011). Fixing rail fastening assembly and used in the dowel and a screw. Patent RU104188U1.

Akimov, V.P. (2012). Dowel rail fastening. Patent RU113743U1.

Akimov, V.P., Krysanov, L.G., Serebrennikov, V.V., Ressina, N.V. (2008). Dowel fastening rail fastening assembly. Patent RU71662U1.

Alexandrova, V.V., Zaytseva, A.A. (2012). 3D-technologies and cognition programming. Information-measuring and Control Systems, 10 (5), pp. 61–65.

Alexandrova, V.V., Zaytseva, A.A. (2013). 3D modeling and 3D prototyping of complex space forms in the technology of cognitive programming. SPIIRAS Proceedings, 4 (27), pp. 81–92.

Bolshakov, V., Bochkov, A., Sergeev, A. (2010). 3D modeling in AUTOCAD, KOMPAS-3D, SOLIDWORKS, INVENTOR, T-FLEX: Training course. Saint Petersburg: Piter.

Borodin, S.P., Akimov, V.P., Ressina, N.V. (2013). Dowel and method of sleeper repair. Patent RU2482236C1.

Dydyshko, P.I. (2009). Analysis of current normative documents on design and maintenance of permanent way and roadbed. Vestnik of the Railway Research Institute, 6, pp. 15–21.

Karpushchenko, N.I. (2007). Issues and prospects of track structure improvement. The Siberian Transport University Bulletin, 16, pp. 42–62.

Karpushchenko, N.I., Antonov, N.I. (2003). Improvement of rail fasteners. Novosibirsk: Publishing House of the Siberian Transport University.

Kuznetsov, V.V., Eremushkin, A.A. (2006). Testing of rail fasteners continues. Railway Track and Facilities, 5, pp. 14–17.

Ministry of Railways (2001). Regulations on track facilities in the Russian Federation. Moscow: Ministry of Railways, p.79.

Ministry of Railways (2003). Specifications for repair and preventive and predictive maintenance of tracks. TsPT-53. Moscow: Ministry of Railways, p. 150.

Nikitin, D.A., Krivosheev, A.V., Kuznetsova, K.A. (2014). Dowel the mounting rail fastening assembly. Patent RU144345U1.

Nikitin, D.A., Vasilyev, A.Ye., Nikitina, L.V. (2009). Polypropylene composition. Patent RU2353635C1.

Nikitin, D.A., Vasilyev, A.Ye., Krivosheev, A.V., Kuznetsov, G.A. (2013). Dowel fastening rail fastening assembly. Patent RU127755U1.

Nikitina, L.V., Kosobudsky, I.D., Ushakov, N.M. (2013). Systems based on thermoplastic polymer with improved thermoplastic properties. In: Proceedings of the 10th International Scientific and Practical Conference with Virtual Participation "Scholarly Discussion: Problems of Mathematics, Physics, Chemistry and Biology", 10, pp. 66–70

Nikitina, L.V., Kosobudsky, I.D. (2016). Modification thermoplastic polymer nanoparticles of silica and properties of obtained composites. In: Proceedings of the International Conference "Prospective Polymeric Composite Materials. Alternative Technologies. Processing. Application. Environment" ("Kompozit-2016"), pp. 232–234.

Nikitina, L.V., Nikitin, D.A. (2013). Polypropylene modification with nano-sized silicon dioxide in order to change its mechanical properties. Science Review, 10, pp. 116–123.

Nikitina, L.V., Nikitin, D.A. (2015). Physical-mechanical properties of a composite polymeric material based on polypropylene doped with titanium dioxide nanoparticles. Scientific Thought, 3, pp. 359–363.

Omarova, G.A. (2010). Experimental studies of resistance to anchor and dowel pulling-out from reinforced concrete sleepers. In: Proceedings of the 6th International Scientific and Practical Conference "Recent Scientific Advances — 2010", 19, pp. 41–46.

Russian Railways (2013). Instructions for assembly, installation and operation of a track with a ZhBR-65PSh rail fastener with a polymeric rail pad on reinforced concrete sleepers. Available at: (accessed on: 14.01.2019).

Russian Railways (2016). Dowel. Specifications TsP 369 TU-7. Available at: (accessed on: 12.02.2019).

Russian Railways (2017).Plastic dowel for reinforced concrete sleepers (ShZ-D type) with ZhBR-65Sh screw/dowel rail fasteners. Specifications TU 2291-001-82660849-2012. Moscow: Russian Railways.

State Committee of the USSR for Standards (1980). State Standard GOST 11262-80. Plastics. Tensile test method. Moscow.

VNIIZhT JSC (Railway Research Institute) (2011). Modernized plastic dowel for reinforced concrete sleepers (ShZ-D type) withr ZhBR-65Sh screw/dowel rail fasteners. Specifications TU 2291-207-01.00.000. Available at: (accessed on: 11.01.2019).

Vossloh Fastening Systems GmbH (2010). Plastic dowel Sdü 25. Specifications TU 01.1.3419-2010. Available at: (accessed on: 01.02.2019).



  • There are currently no refbacks.


ISSN: 2500-0055