Sergei Sychev, Gennady Badin


The concept and methodology for interactive design of Methods of Statement based on the use of technical and informational models, technological charts, and 3D models of construction facilities is suggested. The article presents the peculiarities and principles for the speed-up assembling (erection, disassembling) of unified modular structures, pre-fabricated block sections, their transportation and rapidly erected modular buildings. The high speed of construction is reached due to the qualitative interactive Method of Statement, logistics of sequence and completeness of information, use of BIM technologies, unconditional use of permanent quality control of works execution at all construction stages with the automatic control of accuracy as to positioning of construction structures and execution of construction and technological operations.


fast assembly, pre-fabricated unified modular structures, rapidly erected modular buildings, the high speed of construction, method of Statement, logistics, BIM technologies, quality control, accuracy control

Full Text:



Adam, F.M. (2001). Sovershenstvovanie tehnologii stroitel'stva modul'nyh bystrovozvodimyh malojetazhnyh zdanij [Improvement in the technology for construction of modular, rapidly erected low-rise buildings]. PhD thesis in Engineering Science. Saint Petersburg, p.154 (in Russian).

Afanasiev, А.V., Afanasiev, V.А. (1998). Organizacija stroitel'stva bystrovozvodimyh zdanij i sooruzhenij. Bystrovozvodimye i mobil'nye zdanija i sooruzhenija: perspektivy ispol'zovanija v sovremennyh uslovijah [Arrangement of construction of rapidly erected buildings and structures. Rapidly erected buildings and structures: prospects of use in the modern conditions]. Saint Petersburg: Stroyizdat, pp. 226–230 (in Russian).

Afanasiev, А.А. et al. (2000). Tehnologija vozvedenija polnosbornyh zdanij [Technology for pre-fabricated buildings’ erection]. Moscow: Publishing House ASV, 287 p. (in Russian).

Anderson, M., Anderson, P. (2007). Prefab prototypes: Site-specific design for offsite construction. New York: Princeton Architectural Press, 123 p.

Asaul, A.N., Kazakov, Yu.N., Bykov, V.L., Knyaz, I.P., Erofeyev, P.Yu. (2004). Teorija i praktika ispol'zovanija bystrovozvodimyh zdanij [Theory and practice of use of rapidly erected buildings]. Saint Petersburg: Publishing House Humanistika, p.463 (in Russian).

Badyin, G М., Sychev, S.А. (2015). Analysis of rapidly erected structures’ erection and operation defects [Analiz defektov montazha i jekspluatacii bystrovozvodimyh konstrukcij]. Penza: Publishing House "Akademija Estestvoznanija" [Academy Of Natural History], part 2, pp. 218–223 (in Russian).

Bolotin, S.A., Dadar, А.Kh., Ptukhina, I.S. (2011). Imitacija kalendarnogo planirovanija v programmah informacionnogo modelirovanija zdanij i regressionnaja detalizacija norm prodolzhitel'nostej stroitel'stva [Simulation of calendar planning in Building information modelling programms and regression detailing of construction period rules]. Magazine of Civil Engineering, 7 (25), pp. 82–86 (in Russian).

Central Scientific Research Institute of the Organization for Building Mechanization and Technical Aid (TsNIIOMTP) (2007a). Metodicheskie rekomendacii po razrabotke i oformleniju proekta organizacii stroitel'stva i proekta proizvodstva rabot [Methodological recommendation for the development and preparation of a construction project, order of works]. MDS 12-81.2007. Moscow (in Russian).

Central Scientific Research Institute of the Organization for Building Mechanization and Technical Aid (TsNIIOMTP) (2007b). Metodicheskie rekomendacii po razrabotke i oformleniju tehnologicheskoj karty [Methodological recommendation for the development and preparation of a technological chart]. MDS 12-29.2006. Moscow (in Russian).

Day, A. (2011). When modern buildings are built offsite. Building Engineer, 86 (6), pp.18–19.

Fudge, J., Brown, S. (2011). Prefabricated modular concrete construction. Building Engineer, 86 (6), pp. 20–21.

Kazakov, Yu.N., Sychev, S.А. (2015). [Sistema vozvedenija domov zavodskogo izgotovlenija [System for erection of pre-fabricated houses]. In Proceedings of the International Scientific and Practical Conference: Science and education in modern society, Tambov, pp. 63–65 (in Russian).

Kazakov, Yu.N., Sychev, S.А., Nikolskiy, М.S. (2015). Innovacionnaja tehnologija bystrogo vozvedenija jekonomichnyh zhilyh domov iz optimizirovannyh sjendvich-panelej v Rossii [The innovative technology for rapid erection of cost-efficient residential buildings made of tailored sandwich panels in Russia]. International Journal of Applied and Fundamental Research, 9 (4), pp. 577–586.

Knaack, U., Chung-Klatte, Sh., Hasselbach, R. (2012). Prefabricated systems: Principles of construction. Switzerland: Birkhauser, 67 p.

Matveyev, Ye.P. (2000). Teorija, metody i tehnologii rekonstrukcii zhilyh zdanij razlichnyh periodov postrojki [Theory, methods and technologies for restoration of residential buildings]. PhD thesis in Engineering Science. Moscow, Moscow State University of Civil Engineering, p.48 (in Russian).

Sychev, S.А. (2015a). Ocenka tehnologichnosti montazha zdanij i sooruzhenij iz modulej zavodskoj gotovnosti [Сonstructibility assessment for pre-fabriicated modular buildings and structures’ erection]. Journal “Global Scientific Potential”, 9 (54), pp. 37–41.

Sychev, S.А. (2015b). Ocenka kachestva tehnologii vysokoskorostnogo vozvedenija zdanij iz blok-modulej s uchetom kriterija bezopasnosti [Quality assessment with regard to the technology for high-speed erection of modular buildings with account of safety criteria]. Journal “Zhilishchnoe Stroitel`stvo”, 8, pp. 3–8.

Ugorelova, N.V. (2000). Avtomatizacija montazha sbornyh stroitel'nyh konstrukcij [Prefabricated construction structures’ erection automation]. PhD thesis in Engineering Science. Moscow, 167 p. (in Russian).

Verstov, V.V., Badyin, G.М. (2010). Osobennosti proektirovanija i stroitel'stva zdanij i sooruzhenij v Sankt-Peterburge [Peculiarities of designing and constructing buildings and structures in Saint-Petersburg]. Vestnik grazhdanskikh ingenerov [Bulletin of Civil Engineers, 1 (22), pp. 96–104 (in Russian).



  • There are currently no refbacks.


ISSN: 2500-0055