REVIEW OF THE ANALYTICAL ASSESSMENT METHOD OF FINDING THE SEISMIC AND EXTREME LOAD RESILIENCE OF SHEAR LINKS

Lidiia Kondratieva, Aleksandr Kuznetsov, Ekaterina Moiseyeva

Abstract


Introduction: This paper reviews the analytical method of assessing the seismic and extreme load resistance of buildings with a complex macrostructure that includes elastic-plastic inserts operating in shear. Methods: We analyze a number of studies that rationalize the choice of models for simulating complex elastic-plastic deformation in a mechanical system with several degrees of freedom, as well as studies that review the durability and resilience of buildings with a complex macrostructure based on non-linear shear links when subjected to dynamic and extreme impact. We also consider the methods of structural analysis regarding buildings with elastic-plastic inserts, accounting for the plastic hinged joints of metal frames. Results: We apply the analytical method to linear and non-linear systems with n degrees of freedom. We propose a mathematical equation that describes the nature of shear link response to seismic and extreme loads. Our method makes it possible to obtain an analytical solution for structures with proportionate and disproportionate damping by using the direct integration algorithm. Discussion: Most structures with a broad range of construction material properties require a disproportionate damping model. In this study, we solve equations by using the direct integration algorithm based on disproportionate damping. Under high dynamic load, the reinforcement of shear inserts operates in a plastic state.

Keywords


Analytical assessment method, seismic load, extreme impact, elastic-plastic insert.

Full Text:

PDF

References


Bataev, D. K.-S., Gaziev, M. A., Pinsker, V. A. and Chepurnenko, A. S. (2016). Calculation theory for shrinkage stresses in cellular concrete wall panels in carbonation processes with account of creep. VESTNIK MGSU (Monthly Journal on Construction and Architecture), 12, pp. 11–22.

Chepurnenko, A. S., Saibel, A. V., Yazyev, B. M. and Danilova-Volkovskaya, G. M. (2016). Determination of ultimate loads for concrete slabs based on concrete deformation theory of plasticity. Modern Science and Innovation, 1, pp. 93–98.

Chepurnenko, A. S., Savchenko, A. A. and Chepurnenko, V. S. (2019). Applied element method in the solution of plane problems in the theory of creep. Materials Physics and Mechanics, 42 (4), pp. 455–460. DOI: 10.18720/MPM.4242019_10.

Golykh, O. V., Nguyen, C. T. and Dang, K. A. (2010). Elastic-plastic inserts in buildings of complex macrostructure, their rigidity characteristics and effect on intense-deformed condition of buildings at nonuniform deposits. Bulletin of Civil Engineers, 1, pp. 51–55.

Golykh, O. V., Pletnev, V. I. and Rutman, Yu. L. (2011). Buildings with a complex macro structure and non-linear shear links under extreme impact. Saint Petersburg: Lap Lambert Academic Publishing, 101 p.

Nguyen, H. H. and Kondratieva, L. N. (2013). A study of elastic-plastic inserts’ impact on the free vibration of a polyhedral shell. In: Proceedings of the 25th International Conference “Mathematical and Computer Simulation in Mechanics of Solids and Structures. Methods of Boundary and Finite Elements”. Saint Petersburg: Saint Petersburg State University of Architecture and Civil Engineering, pp. 145–146.

Nidzhad, A. Ya. (2014). Realization of macromodel method for frame structures design under maximum design earthquake. Modern Problems of Science and Education, 2. [online] Available at: https://science-education.ru/ru/article/view?id=12449 [Date accessed 30.08.2020].

Omori, F. (1900). Seismic experiments on the fracturing and overturning of columns. Publications of the Earthquake Investigation Committee in foreign languages, 4, pp. 69–141.

Pletnhov, V. I. and Nguyen, C. T. (2011). Experimental research of deformation seams of various width in the bridges of buildings of complicated macrostructure. Bulletin of Civil Engineers, 1, pp. 55–57.

Rutman, Yu. L. (2012). The complex plasto-elastic deformation model of mechanical multiple freedom degree system. Bulletin of Civil Engineers, 1, pp. 117–120.

Rutman, Yu. L. (2013). Accounting the hardening in the elastic-plastic macromodel. Bulletin of Civil Engineers, 4, pp. 110–114.

Rutman, Yu. L., Kovaleva, N. V. and Skvortsov, V. R. (2007). Determining the parameters of a force diagram for structural elements subject to plastic deformation. In: Proceedings of the 22nd International Conference “Mathematical and Computer Simulation in Mechanics of Solids and Structures. Methods of Boundary and Finite Elements”. Saint Petersburg: Research Center MORINTECH, pp. 220–225.

Samsonov, A. V. (2003). Rational structural design and spring-loaded insulation of buildings under the dynamic impact. PhD Thesis in Engineering. Saint Petersburg: Saint Petersburg State University of Architecture and Civil Engineering.

Sanchez-Ricart, L. and Plumier, A. (2008). Parametric study of ductile moment-resisting steel frames: A first step towards Eurocode 8 calibration. Earthquake Engineering and Structural Dynamics, 37 (7), pp. 1135–1155. DOI: 10.1002/eqe.809.

Simbort, E. (2011). Comparison of nonlinear dynamic analyses performed by both single and multi degree of freedom systems. Magazine of Civil Engineering, 6, pp. 23–27.

Smirnov, A. A. (2008). Specifics of assessing the wind and seismic resistance of buildings with a complex macrostructure and their rational design. PhD Thesis in Engineering. Saint Petersburg: Saint Petersburg State University of Architecture and Civil Engineering.




DOI: https://doi.org/10.23968/2500-0055-2020-5-4-60-64

Refbacks

  • There are currently no refbacks.




     

ISSN: 2500-0055