COMPARISON OF THE SHEAR STRENGTH IN HEAVY AND SELF-COMPACTING CONCRETE

Grigory Nesvetaev, Yuliya Koryanova, Anton Chepurnenko

Abstract


Introduction. The shear strength of concrete, while not being an independently standardized indicator of concrete quality, plays an important role in the analysis of reinforced concrete structures. The concepts related to the dependence of the shear strength of concrete on the standardized compressive and axial tensile strength are quite ambiguous. Self-compacting concrete (SCC), which has been widely used recently, is somewhat different from ordinary concrete (OC) compacted by vibration in terms of structure and properties, and data on the shear strength of SCC are sparse. Purpose of the study: We aimed to clarify the dependence of the shear strength of concrete on the standardized compressive and axial tensile strength, and assess the shear strength of SCC in comparison with that of OC. Methods: We compared the shear strength of SCC with that of OC experimentally, by applying the common methodology with the use of a Mörsch specimen and performing modeling in MATLAB with the use of six strength theories. Results: No significant differences were found in the dependence of the shear strength of SCC in comparison with that of OC at the design age of 28 days. In terms of quantity, the excess of the shear strength of SCC relative to OC is less than 12%. The best agreement with the experimental data among those analyzed is provided by the Geniev theory. The shear strength of concretes is most likely described by the equation RkRRsht at k = 0.5–0.6.

Keywords


shear strength, self-compacting concrete, strength theories, fracture criteria.

Full Text:

PDF

References


Andreev, V. I., Chepurnenko, A. S., and Jazyev, B. M. (2014). Model of equal-stressed cylinder based on the Mohr failure criterion. Advanced Materials Research, Vol. 887–888, pp. 869-872. DOI: 10.4028/www.scientific.net/AMR.887-888.869.

Andreev, V. and Potekhin, I. (2019). Calculation of equal strength thick-walled concrete cylinder with free ends. IOP Conference Series: Materials Science and Engineering, Vol. 661, 012023. DOI: 10.1088/1757-899X/661/1/012023.

Bazhenov, V. G., Osetrov, S. L., Osetrov, D. L., and Ryabov, A. A. (2022). Coupled fracture model of elastoplastic materials based on a kinetic equation of damage accumulation and the Pisarenko–Lebedev strength criterion. Journal of Applied Mechanics and Technical Physics, Vol. 63, Issue 1, pp. 104–110. DOI: 10.1134/S0021894422010163.

Borishansky, M. S. (1946). Calculation of bent rods and clamps in reinforced concrete elements subject to bending at the stage of failure. Leningrad, Moscow: Gosstroyizdat, 79 p.

Chepurnenko, A., Yazyev, B., Meskhi, B., Beskopylny, A., Khashkhozhev, K., and Chepurnenko, V. (2021). Simplified 2D finite element model for calculation of the bearing capacity of eccentrically compressed concrete-filled steel tubular columns. Applied Sciences, Vol. 11, Issue 24, 11645. DOI: 10.3390/app112411645.

Ctcmetar.ru (2023). Strength of concrete. [online] Available at: https://ctcmetar.ru/stroitelnoe-materialovedenie/2137-prochnost-betona.html [Date accessed January 12, 2023].

De Gois Laufer, I. and Savaris, G. (2021). Shear strength of steel fiber self-compacting concrete beams. Semina: Ciências Exatas e Tecnológicas, Vol. 42, No. 1, pp. 45–62. DOI: 10.5433/1679-0375.2021v42n1p45.

Dey, S., Praveen Kumar, V. V., Goud, K. R., and Basha, S. K. J. (2021). State of art review on self compacting concrete using mineral admixtures. Journal of Building Pathology and Rehabilitation, Vol. 6, Issue 1, 18. DOI: 10.1007/s41024-021-00110-9.

Dhanabal, G. and Sreevidya, V. (2018). Shear strength characteristics of self compacting geopolymer concrete cast at different ages. International Journal of Latest Engineering and Management Research, Vol. 3, Issue 4, pp. 38–43.

Dovzhenko, O. O., Pohribnyi, V. V., Usenko, I. S., Mal’ovana, O. O., and Akopyan, M. K. (2016). Concrete elements strength under the shear action according to the variation method in the theory of plasticity and tests. ISJ Theoretical & Applied Science, Vol. 44, Issue 12, pp. 12–18. DOI: 10.15863/TAS.2016.12.44.3.

Filatov, V. B., Galyautdinov, Z. Sh., and Kovalenko, M. V. (2020). Experimental study of the work of a reinforced concrete floor slab under punching by column. Engineering Journal of Don, Issue 6. [online] Available at: http://ivdon.ru/en/magazine/archive/N6y2020/6518 [Date accessed January 12, 2023].

Golyshev, A. B., Bachinsky, V. Ya., Polishchuk, V. P., Kharchenko, A. V., and Rudenko, I. V. (1990). Design of reinforced concrete structures: a reference manual. 2nd edition. Kiev: Budivelnik, 544 p.

Gvozdev, A. A. (1949). Calculation of bearing capacity by the method of limit equilibrium. Moscow: Stroyizdat, 280 p.

Krasnoschekov, Yu. V. and Galuzina, R. A. (2016). Strength of concrete as fracture resistance. Vestnik SibADI (Siberian State Automobile and Highway University), No. 1 (47), pp. 61–65.

Liu, Z., Chen, X., Wu, P., and Cheng, X. (2021). Investigation on micro-structure of self-compacting concrete modified by recycled grinded tire rubber based on X-ray computed tomography technology. Journal of Cleaner Production, Vol. 290, 125838. DOI: 10.1016/j.jclepro.2021.125838.

Luksha, L. K. (1977). Strength of thick-walled vessels of brittle materials under external pressure. Strength of Materials, Vol. 9, Issue 2, pp. 178–182.

Mailyan, L. R., Stel’makh, S. A., Shcherban’, E. M., Kholodnyak, M. G., Smolyanichenko, A. S., Parinov, I. A., and Cherpakov, A. V. (2023). Features of electrophysical impact on mortar and concrete mixtures. In: Management of Structure Formation and Properties of Cement Concretes. Innovation and Discovery in Russian Science and Engineering. Cham: Springer, pp. 177–215. DOI: 10.1007/978-3-031-08919-0_9.

Mikhailov, K. V. (ed.) (1977). New on the strength of reinforced concrete. Moscow: Stroyizdat, 272 p.

Morsh, E. (1903). Versuche Uber schubspannugen in betoncisentregern. Beton und Eisen, Vol. 2, No. 4, pp. 269–274.

Nesvetaev, G. V. and Belyaev, A. V. (2016). About adhesion between structural LWA concrete and ordinary concrete in the in-situ layered slabs. Naukovedenie, Vol. 8, No. 4. [online] Available at: http://naukovedenie.ru/PDF/24TVN416.pdf [Date accessed January 12, 2023].

Nesvetaev, G. V., Koryanova, Y. I., Chepurnenko, A. S., and Sukhin, D. P. (2022a). On the issue of modeling thermal stresses during concreting of massive reinforced concrete slabs. Engineering Journal of Don, Issue 6. [online] Available at: http://ivdon.ru/en/magazine/archive/n6y2022/7691 [Date accessed January 12, 2023].


Refbacks

  • There are currently no refbacks.




     

ISSN: 2500-0055