PRACTICAL CALCULATION OF FLEXIBLE MEMBERS WITH THE USE OF NON-LINEAR DEFORMATION MODEL AS EXEMPLIFIED BY TYPICAL GIRDER RGD 4.56-90

Eres Opbul, Dmitrii Dmitriev, Phan Van Phuc

Abstract


The article is devoted to practical calculation of strength of flexible members made on the basis of non-linear deformation model taking into account experimental diagrams of materials deformation. The relative deformations are determined in the proposed calculation depending on maximum flexion of a member. The calculation of maximum flexion of a member will be performed using two iteration methods. The basic calculation formula, original block diagrams of methods and comparison of calculation parameters proceeding from results of practical calculations made as exemplified by typical girder are provided.

Keywords


Deformation model, non-linear calculation, deformation diagram, iteration, stiffness matrix, stress diagram, neutral line, reinforcement

Full Text:

PDF

References


Boujelben, A., Ibrahimbegovic, A. (2017). Finite-strain three-dimensional solids with rotational degrees of freedom: non-linear statics and dynamics). Advanced Modeling and Simulation in Engineering Sciences, 4 (1), 3. DOI: 10.1186/s40323-017-0089-9

Dalla Valle, P., Thom, N. (2018). Improvement to method of equivalent thicknesses (MET) for calculation of critical strains for flexible pavements. International Journal of Pavement Engineering, 19 (12), pp. 1053–1060. DOI: 10.1080/10298436.2016.1238698

Fatehiboroujeni, S., Palanthandalam-Madapusi, H.J., Goyal, S. (2018). Computational Rod Model with User-Defined Nonlinear Constitutive Laws. Journal of Computational and Nonlinear Dynamics, 13( 10), 101006. DOI: 10.1115/1.4041028

Jagtap, K.R., Lal, A., Singh, B.N. (2018). Uncertainty quantification in non-linear dynamic response of functionally graded materials plate. Mechanics of Advanced Materials and Structures, 25 (13), pp. 1081–1100. DOI: 10.1080/15376494.2017.1329465

Kong, G., Zhou, Y., Liu, H. (2018). Nonlinear model analysis of radial bulging deformation of geosynthetic-encased stone columns. International Journal of Geomechanics, 18 (10), 06018022. DOI: 10.1061/(ASCE)GM.1943-5622.0001195

Mao, J.-J., Zhang, W. (2018). Linear and nonlinear free and forced vibrations of graphene reinforced piezoelectric composite plate under external voltage excitation. Composite Structures, 203, pp. 551–565. DOI: 10.1016/j.compstruct.2018.06.076

Minstroy RF (2013). SP 63.13330.2012. Concrete and reinforced-concrete structures. Basic provisions. Updated issue of SNiP 52-01–2003 (with revision Nos 1, 2), Moscow. (in Russian)

Morozov, V.I., Opbul, E.K. (2016). Raschet izgibaemyh stalefibrozhelezobetonnyh ehlementov po nelinejnoj deformacionnoj modeli s sipol'zovaniem opytnyh diagramm deformirovaniya stalefibrobetona [Calculation of bending steel fiber reinforced-concrete members according to non-linear deformation with the use of experimental diagrams of deformation of steel fiber reinforced-concrete]. Vestnik grazhdanskikh ingenerov [Bulletin of Civil Engineers], 5 (58), pp. 51–55. (in Russian)

Opbul, E.K., Dmitriev, D.А., Vedernikova, A.A. (2017). Nelinejno-iteracionnyj raschet prochnosti stalefibrozhelezobetonnyh ehlementov s sipol'zovaniem opytnyh diagramm deformirovaniya materialov [Non-linear and iteration calculation of strength of steel fiber reinforced-concrete members with the use of experimental diagrams of materials deformation]. Vestnik grazhdanskikh ingenerov [Bulletin of Civil Engineers], 1 (60), pp. 79–91. (in Russian)

Patni, M., Minera, S., Groh, R.M.J., Pirrera, A., Weaver, P.M. (2018). Three-dimensional stress analysis for laminated composite and sandwich structures. Composites Part B: Engineering, 155, pp. 299–328. DOI: 10.1016/j.compositesb.2018.08.127

TsRIIPromzdaniy OJSC (2005). Guidebook for designing concrete and reinforced-concrete structures from heavy concrete without pre-stressing (to SP 52-101-2003), Мoscow. (in Russian)




DOI: https://doi.org/10.23968/2500-0055-2018-3-3-29-41

Refbacks

  • There are currently no refbacks.




     
ISSN: 2500-0055