Marlena Rajczyk, Paweł Rajczyk


The subject of the article is the presentation of European experience in the field of construction of industrial concrete floors. For the construction of the concrete slab floor to be prepared subsoil. Land stabilization can include mechanical stabilization, physical stabilization, and chemical stabilization.
The most commonly used stabilization is mechanical stabilization. In order to determine the efficiency and effectiveness of the process, the treatment depends on the soil moisture for the soil type, so attention is paid to this material feature. Accordingly, the recipes from the French experience for the concrete stabilization layer are presented.
For such prepared substrate the choice of material parameters and properties of concrete mixtures for concrete slabs for the concrete class in the strength of 10 to 35 MPa was presented.


Industrial flooring, concrete floors, stabilization, concrete mixes, material properties

Full Text:



Czarnecki, L., Rydz, Z. (1995). Rozwój posadzek przemysłowych [Development of industrial flooring]. Materiały budowlane [Construction Materials], 9. pp. 12–13. (in Polish)

Czarnecki, L., Rydz, Z. (1998). Posadzki przemysłowe betonowe i z żywic syntetycznych [Industrial flooring: concrete and synthetic resin flooring]. Materiały budowlane [Construction Materials], 9, pp. 2–7. (in Polish)

Jamrozy, Z. et al. (1990). Betony specjalne konstrukcyjne [Special structural concretes]. Krakow: Krakow Polytechnic University. (in Polish)

Potrzebowski, J. (1998). Dobór warstw posadzek przemysłowych [Selection of industrial flooring layers]. Materiały budowlane [Construction Materials], 9. (in Polish)

Rajczyk, J. (2013). Modelling the geometric structure of concrete work item processing. Applied Mechanics and Materials, 405–408, pp.638–643. DOI: 10.4028/

Rajczyk, J., Kosin, M., (2011). Methodology of analyzing a new geometry design of a friction plate effect on the engineered surfaces. IET Conference Publications, 2, pp. 177–180.

Rajczyk, J., Rajczyk, M., Kalinowski, J. (2016). Performance parameters of concrete and asphalt-concrete surfaces. In: Proceedings of the International Conference on Advanced Materials and Engineering Structural Technology (ICAMEST 2015), pp. 419–422.

Rolla, S. (1983). Nowoczesne nawierzchnie betonowe [Modern types of flooring]. Warsaw: Transport and Communication Publishers. (in Polish)

Rolla, S. (1985). Badania materiałów i nawierzchni drogowych [Testing of materials and road surfaces]. Warsaw: Transport and Communication Publishers. (in Polish)

Rowinski, L. (1978). Zmechanizowane roboty budowlane [Mechanized construction operations]. Warsaw: Arkady. (in Polish)

Rowinski, L. et al. (1980). Technologia monolitycznego budownictwa betonowego [Technology of monolithic construction from concrete]. Warsaw: Polish Scientific Publishers. (in Polish)

Stypulkowski, B. (1981). Materiały w budownictwie [Materials in construction]. Warsaw: Transport and Communication Publishers. (in Polish)

Wolski, Z. (1996). Roboty podłogowe [Flooring construction]. Warsaw: Arkady. (in Polish)


  • There are currently no refbacks.

ISSN: 2500-0055